A boiler is an expensive, complex, and important appliance that not only keeps you warm in the winter season but also provides hot water to bathe, wash dishes, and more.
So, you will certainly not want it to run into issues. If it does, you will need to have it checked, repaired, or replaced.
What should You Know about Boiler Installation London?
- Hire a Professional
Whether it is for an annual servicing and minor repair or a complete installation, they will ensure a smooth and perfect Boiler installation London.
Since they know everything about the job, they will ensure removing the old boiler and installing the new one, and everything in between is done carefully and strategically.
The entire process will involve a few specific steps.
- Removing the Existing Boiler
Before installing the new unit, the technician will remove the old one entirely if you want the new boiler in the same place. This process involves disconnecting the unit from the power source and water supply,
However, if you want a new place for Boiler installation London, the technician will survey the spot and find out the obstructions, if any, and determine its feasibility and let you know.
- Size Matters
The size of the space and the surrounding conditions will determine the size of the boiler you will need. It will also depend on other specific factors, such as:
- The usage
- The type of your home and
- The type of boiler you want.
Typically, the size of a boiler is measured in kilowatts (kW) and not in length, breadth, and height. Usually, a small house would need a 24kW boiler.
- Boiler Type
Ideally, there are two types of boilers – regular and combi.
You may choose a regular boiler that does not have a hot water cylinder integrated into it.
On the other hand, the combi boilers have these cylinders built inside them. This makes them smaller than the regular boilers. These systems are suitable for use in apartments and flats.
However, you must choose a regular boiler if your house is large because these boilers are faster and operate more efficiently.
- Installation
The installation process takes quite some time, depending on the amount of work the technician needs to do and the hindrances therein.
After removing the old boiler, the technician will set up the new unit and connect it properly to the power source, water outlet, radiator, and main water supply. If you are installing a combi boiler, they will connect it to the storage tanks of hot and cold water.
- Testing
Once the process is complete, the final step of Boiler installation London involves testing the system.
They will do a lot of things to find out whether or not it is working correctly and the system is not overloaded. They will change the thermostat to regulate the temperature, inspect the radiators, turn the water supply on and off, and more.
- The Cost Factor
It is pretty difficult to say how much it would cost you to install the boiler because different companies may have different pricing policies.
Typically, the cost of installing a boiler depends on a few specific factors, such as:
- The amount of actual work
- The amount of additional work
- The components and
- Labor.
The type of technician at work will also determine the cost. If you hire a professional technician, they will undoubtedly charge you more than someone less experienced in your locality.
Therefore, the best way to have a fair idea about the cost of boiler installation is to research and collect quotes from different installers.
- Additional Factors
The space for installing the boiler may not be just as the technicians expect. It may be in the attic or the utility room, in the kitchen, or outdoors. It ideally depends on the design and proximity to the power source.
Depending on the space, you and the technician may need to do some additional clearing and moving of stuff that may hinder the operation of the unit as well as accessibility for the technician.
Preventing leakage, especially for those gas-powered systems, is also crucial for the proper functioning of the boiler and lowering energy bills by preventing wastage.
- Choosing the Right Person
Finally, choosing the right person for the job is very important. This does not mean a technician with a valid ID only. It involves proper licensing, which is issued by different authorities depending on the power source of the unit.
So, hire a professional registered with the right group.
Conclusion
It is important to ensure the safety and proper functionality of the boiler after installation. So, when it comes to installing boilers, it is prudent to call an expert technician. It is all the more critical if your product is within the warranty period because they will keep it intact.
Also Read: System vs Combi Boiler: Which is the Perfect Choice for Your Home?
Comments