By 
A shower is one of the greatest comforts in a home, but the truth is that a poorly installed cabin or used silicone can lead to leaks. What then? Water leaking from the shower can cause big problems – from streaks on the floor to the development of mold on the walls. That is why, to prevent this, it is necessary to properly seal the shower cabin. In this article, we will tell you what and how to effectively seal the cabin to avoid problems.
- What waterproof barrier should you choose to seal your shower cabin?
- How to use waterproofing methods yourself and seal your shower cabin?
- What should shower waterproofing look like step by step?
If you are wondering how to waterproof a shower – you are in the right place. We explain how to choose waterproof membranes, what you can do yourself and what it should look like step by step. If this is your next project – let’s get started!
What waterproof barrier should you choose to seal your shower cabin?
There is no doubt that a waterproof barrier in a shower cabin is an absolute must if you want to avoid leaks, mould, and costly renovations in the future. Choosing the right one depends on the type of surface, the degree of exposure to moisture, and the style of finishing you are planning. The most popular waterproof barriers include: liquid foil (waterproofing in the form of a coating), sealing mats (tapes, mats, corners), waterproof building boards.
If it is to be a seal under tiles, a liquid foil plus corner tapes can work great. If your goal is primarily to protect joints and seams, consider a joint impregnation and a good flexible mortar. On the other hand, a walk-in cabin works well when it comes to liquid foil, mat, and linear drain. Do you have an OSB, GK, MDF substrate? Be sure to choose a primer and a flexible liquid foil.
How to use waterproofing methods yourself and seal your shower cabin?
You can definitely waterproof your shower cabins yourself. It will bring you huge benefits – it is not only control, but also a guarantee of safety and hygiene. You don’t have to worry about this DIY project – it will definitely work if you stick to the schemes.
Additional tip! You can always use the online waterproofing cost calculator before choosing the right method. Your toilet, as well as the entire bathroom, will only benefit from this, because you will protect the shower area from water damage. By following the right steps during installation and renovation – you will not allow yourself to make a mistake when you choose to waterproof a shower.
What should shower waterproofing look like step by step?
First of all, prepare the surface, i.e. remove all loose elements, dust and grease. If you want to achieve a professional finish, the substrate should be clean, dry and stable. Additionally, make sure that there are no cracks or unevenness – if necessary, fill the walls in your bathroom with filler. Only with such preparation can you proceed to the next steps and obtain a properly waterproofed place.
In the next step – prime the surface, fill all the holes and wait with further creation of membranes until it dries completely. Then you should use waterproof tape and sealing corners. A good choice are liquid foils – liquid membrane and preferably in 2 layers, this is a higher quality coat. Here it is also necessary to wait for complete drying before the next step, i.e. gluing tiles or installing the cabin. Always remember about carefully cut when working with floor tiles, matching their edges or trimming adhesive tape.
Comments